ATI 9500NP / 9800SE Hardmod |
 |
|
Author: W1zzard
Date: 2004-07-25 09:10:32
| |
Before doing this Mod it's suggested that you verify that your card works perfectly stable with 8 Pipelines (use the softmod from here).
On the 9500 Non-Pro and 9800SE the resistor is in position 1-2.
On the 9800 Pro the resistor is in position 2-3.
To enable eight pipelines make a connection between 2-3 (you can leave the resistor in place).
After making the connection you have to flash an 8 pipeline BIOS with the same memory configuration as your card. The 9500NP should use a 9700NP Bios, the 9800SE a 9800NP or 9800 Pro BIOS.
When the BIOS is flashed your card will be recognized as a full eight pipeline card by Windows - the softmod drivers are no longer required.
If you have artifacts with the softmod, the hardmod will not fix them.
On the 9500 Non-Pro and 9800SE the resistor is in position 1-2.
On the 9800 Pro the resistor is in position 2-3.
To enable eight pipelines make a connection between 2-3 (you can leave the resistor in place).
After making the connection you have to flash an 8 pipeline BIOS with the same memory configuration as your card. The 9500NP should use a 9700NP Bios, the 9800SE a 9800NP or 9800 Pro BIOS.
When the BIOS is flashed your card will be recognized as a full eight pipeline card by Windows - the softmod drivers are no longer required.
If you have artifacts with the softmod, the hardmod will not fix them.
